This product is mainly made of low-density polyethylene resin through mixing, plasticizing and granulation. It features excellent electrical and physical properties, and has outstanding anti-scorching performance. It can effectively reduce the risk of pre-crosslinking and old scorching during the cable production process, extend the continuous operation cycle of the cable and improve production efficiency.
Performance indicators (typical values): enforce standards:JB/T10437-2004
Serial number | Test project | Unit | Indicator | ||
1 | Tensile strength | MPa | ≥13.5 | ||
2 | Elongation at break | % | ≥350 | ||
3 | Air thermal aging | Test conditions | 135℃×168h | ||
Rate of change of tensile strength | % | ±20 | |||
Rate of change in elongation at break | % | ±20 | |||
4 | (-76℃)Impact embrittlement performance | N/A | ≤15/30 | ||
5 | Thermal extension 200℃,0.2MPa,15min | Elongation under load | % | ≤80 | |
6 | Permanent deformation rate after cooling | % | ≤5 | ||
7 | Gel content | % | ≥80 | ||
8 | Volume resistivity,20℃ | Ω.cm | ≥1.0×1014 | ||
Density | g/cm3 | 0.921±0.003 | |||
9 | 50Hz、20℃ | Relative dielectric constant | / | ≤2.35 | |
Dielectric loss factor | / | ≤0.001 | |||
10 | Dielectric strength | MV/m | ≥25 | ||
Application process reference
Region1 | Region2 | Region3 | Region4 | Region5 | Region6 | Region7 | Region8 | Neck of the machine | Nose of the machine |
85℃ | 105℃ | 108℃ | 110℃ | 112℃ | 113℃ | 113℃ | 113℃ | 115℃ | 114℃ |
Packaging and storage
The product is packed in a waterproof and dustproof PE inner bag, with a hard corrugated carton for shaping and protection, and an additional waterproof film cover. The standard net weight of each box is 500kg or 600kg.
It should be stored in a clean, dry and well-ventilated environment, with an appropriate storage temperature ranging from 0℃ to 35℃
3. The stacking height should not exceed two layers, and the upper and lower layers should be neatly stacked. It is not advisable to stack them in a staggered manner.
The validity period is 6 months under suitable storage conditions.