中国·太阳成集团(tyc33455cc)有限公司-首页欢迎您

TUV photovoltaic irradiation cross-linked low smoke zero halogen insulating material TFWJ5000 TUV in

This product is mainly applied to the insulation layer of TUV1169 standard photovoltaic cables. With excellent extrusion fluidity, it is suitable for high-speed wire production, and the maximum wire processing speed can reach 300m/min.

Contact Download

Product details

Product model and name:

TFWJ5000 TUV Irradiation cross-linked low smoke zero halogen insulating Material for photovoltaic use

Performance indicators (typical values) : Execution standard: TUV1169

Serial number	Test project	Unit	Indicator	Typical value
1	Density	g/cm3	1.25±0.02	1.25
2	Hardness	ShoreA	96±2	96
3	Volume resistivity	Ωm	≥5×1012	1.1×1013
4	Tensile strength	MPa	≥8	11.8
5	Elongation at break	%	≥150	250
6	Air thermal aging		150℃×168h
6.1	Rate of change of tensile strength	%	±30	+11
6.2	Rate of change in elongation at break	%	±30	-9.8
7	Low-temperature impact embrittlement at -40		≤15/30	Pass
8	Thermal extension		200℃×15min×0.2MPa
8.1	Elongation under load	%	≤100	40
8.2	Permanent elongation after cooling	%	≤25	5
9	Combustion releases acidic gases
	HCL and HBr	%	≤0.5	0
	HF	%	≤0.1	0
	pH		≥4.3	5.7

Application process reference

It is recommended that the temperature of the extruder body be 135 to 165℃. Head temperature: 170℃ to 175℃. It is recommended to use low smoke zero halogen screws with a compression ratio of 1.4 to 1.6. The maximum melt temperature is suggested to be controlled within 185℃.

The product is packed in moisture-proof aluminum foil polyethylene composite film bags, 20kg per bag, and transported by single palletizing, with each palletizing weighing 1000kg.

It should be stored in a clean, dry and well-ventilated environment. The suitable storage temperature is 0℃ to 35℃.

The product is vacuum-packed. It is strictly prohibited to stack it up and down during transportation and storage.

The validity period is 6 months under suitable storage conditions.